Skip to content
← Back to all guides
commercialadvanced

Convert a Vacant Retail Storefront into an Indoor Golf Simulator Lounge

Vacant Strip-Center or Main-Street Retail Storefront, Roughly 3,000 to 7,000 Square Feet, with a Clear Open Floor and at Least 11 to 12 Feet to the Structure Above → Indoor Golf Simulator Lounge with Four to Six Enclosed Hitting Bays, Overhead Launch Monitors, Padded Bay Dividers, a Bar and Lounge Area, Online Booking, and an Optional Members-Only After-Hours Access System

Last updated

Indoor golf has become one of the busiest second uses for empty storefronts. The National Golf Foundation counted a record 48.1 million U.S. golf participants in 2025, with about 29.1 million playing on a course and roughly 19 million more playing only off-course at ranges, entertainment venues, and simulators. NGF estimates there are now more than 1,500 simulator businesses in the country, and it says most new golfers now get their start off the course. Operators have also learned that a simulator lounge does not need a big box: a storefront of 4,000 to 7,000 square feet can hold four to six bays plus a bar, and chains like GolfSuites are moving toward smaller lounge formats for exactly that reason. Meanwhile, retail closures have left plenty of vacant storefronts, and landlords are looking for tenants who bring evening and winter traffic. This is an advanced project rather than a simple fit-out because three things decide whether a storefront works. The first is height: a full driver swing needs about 10 feet at the very least and closer to 11 or 12 feet for tall players, and many storefronts hide a 9-foot drop ceiling under the deck, with sprinkler pipes and ducts right in the swing path. The second is the building code: adding a bar usually turns a retail (Group M) space into an assembly (Group A-2) space, which can trigger sprinklers, more exits, and a lot more restrooms. The third is money: industry budgets for a four-to-six-bay venue with a bar run roughly $350,000 to $900,000, and premium bays cost far more than home setups. The guide covers vetting the space, picking a business model, the occupancy and restroom questions, the bay build, technology, the bar and liquor license, and opening.

Cost Range

$200,000 – $900,000

Timeline

16–40 weeks

Materials Cost

$402,800

Permits Cost

$14,000

Estimates only. Costs shown are national averages and vary by location, year, project scope, and finish quality. Permit requirements differ by jurisdiction — always confirm with your local building department and get quotes from licensed contractors before starting.

Steps

1

Choose a Business Model Before You Choose a Space

Indoor golf venues fall into a few models, and the model drives the floor plan, the code path, and the budget. A practice-focused studio with three or four bays, no bar, coaching, and club fitting is the cheapest to build and can often stay under 50 occupants. A social lounge with four to six bays, a full bar, and a food menu earns more per visit from groups and events, but it is an assembly use with a liquor license. A members-only club with keyless after-hours access, which many small operators now run, keeps labor low but depends on monthly memberships, good cameras, and an insurance carrier that accepts unstaffed hours. Before you tour buildings, check the local market: count nearby simulator venues, note their hourly rates and membership prices, and see how full their evening and winter calendars are. Across the U.S., most venues charge somewhere between $20 and $80 an hour per bay, with many in the $35 to $60 range and higher prices at peak times. Build a simple model with bay hours, a realistic utilization rate, food and drink sales, lessons, leagues, and events. Indoor golf is seasonal in warm climates and busiest in winter in cold ones, so plan for the slow months. Operators who have closed often underestimated build costs or overestimated how many hours each bay would be booked.

Estimated time: 21 days

2

Vet the Storefront: Height, Columns, and Neighbors

Height is the deal-breaker, so measure it yourself before you negotiate a lease. Lift a few ceiling tiles and measure from the slab to the lowest thing above the hitting area: the bottom of the roof joists, the sprinkler pipes, the ductwork, and the light fixtures. Plan on at least 10 feet of clear height at the hitting position and 11 to 12 feet if you want tall players swinging drivers comfortably. Many storefronts have a drop ceiling at 9 or 10 feet with 12 to 14 feet to the deck, so you can gain height by removing the ceiling and moving pipes and ducts toward the walls or over the screen end of each bay. Next check the floor plan. Each bay needs roughly 12 to 16 feet of width and 15 to 20 feet of depth, and once you add circulation, plan on about 350 to 500 square feet per bay. Columns in the middle of the space can make bays narrow or force awkward layouts. Look for a long, open space where bays can line up along one wall. Then think about the neighbors: ball strikes on impact screens are loud and repeat all night, which can be a problem for a dentist or apartment next door. Finally, confirm parking, the electrical service size, the condition of the rooftop HVAC units, and whether the lease allows alcohol and late hours.

Estimated time: 14 days

3

Settle the Code Path: Occupancy, Sprinklers, and Restrooms

Hire an architect early and have them write a code analysis before you sign the lease. A retail store is usually a Group M (mercantile) occupancy. A golf lounge where people eat and drink is generally Group A-2 (assembly), and that change of occupancy brings new requirements. Under the International Building Code, an assembly space with fewer than 50 occupants can often be classified as Group B instead, which is one reason a small studio without a bar is much simpler to permit. Once you are a true A-2 space, the IBC generally requires automatic sprinklers when the fire area is over 5,000 square feet, holds 100 or more people, or is on a floor other than the exit level. If the building is not sprinklered, that alone can change the budget. Restrooms are the hidden cost. Under the International Plumbing Code, retail space needs about one toilet per 500 occupants, while restaurants need about one per 75 and bars about one per 40. A storefront with one restroom may need two or three new ones, plus new drain lines cut through the slab. You also need an accessible route to the bays, the bar, and the restrooms, and enough exits for the occupant load. Your local code edition and amendments may differ, so treat these numbers as a starting point and let your architect confirm them.

Estimated time: 21 days

4

Design the Bays and the Room

Lay out the bays along the longest wall with the screens at the far end, the hitting mats 10 to 12 feet in front of the screens, and seating behind the hitters. Separate the bays with full-height padded walls or heavy divider netting, because a shanked shot from the next bay is the most common safety problem in multi-bay venues. Behind each hitting area, leave space for a couch or high-top table and a TV that shows the scorecard. Plan the ceiling carefully: move sprinkler heads, ducts, and lights out of the swing path, cover anything low near the hitting area with padding, and paint the area around the screens a dark, flat color so the projected image stands out. Lighting should be dimmable, aimed down at the mat and away from the screens. Acoustic treatment matters for both guests and neighbors: add acoustic panels on the walls, sound-absorbing material behind each screen, and insulation in demising walls you share with other tenants. Size the HVAC for the extra heat from people, projectors, and computers, and for the high-energy evening crowds. Plan electrical circuits and data cables for each bay, including a ceiling outlet and network drop for the projector and launch monitor.

Estimated time: 28 days

5

Build Out the Space

Once the permit is issued, the general contractor typically starts with demolition: removing the old ceiling, display fixtures, and unneeded walls. Then come the slab cuts and plumbing for any new restrooms and the bar sink, floor drains, and grease interceptor if the health department requires one for food service. Next come sprinkler modifications or a new sprinkler system, electrical work, HVAC upgrades, and framing for restrooms, storage, an office, and the bar back. Build the bay divider walls with framing strong enough to carry padding and netting hardware. The floor in the hitting area should be level and solid: set the hitting mat on a firm base with a turf border so it does not shift. Use durable, dark, easy-to-clean finishes in the lounge areas, because spilled drinks and divots will happen. Schedule inspections at each stage, including rough-in, above-ceiling, and final inspections. Expect the build to take 8 to 16 weeks once the permit is in hand, longer if a sprinkler system or new restrooms are involved.

Estimated time: 70 days

6

Install the Simulator Technology

Each bay needs a launch monitor, an impact screen and frame, side netting or padded walls, a projector, a hitting mat and turf, a gaming computer, and simulation software. Overhead launch monitors mounted in the ceiling are popular in commercial venues because they keep the floor clear, work for both right- and left-handed players without moving equipment, and are harder to damage. Floor units cost less but must be repositioned for lefties and can get hit. Industry estimates for a full commercial bay range widely, from about $25,000 for a solid mid-range setup to $80,000 or more for premium systems, and some high-end operators spend close to $100,000 per bay. Choose commercial-grade impact screens and plan to replace them, and hitting mats, regularly. Mount short-throw projectors on the ceiling above or just behind the hitter so players do not cast shadows on the screen. Software licensing for commercial use is often an annual fee per bay, so include it in your operating budget. Set up the bay computers on a wired network with remote management, and keep a spare launch monitor or projector in reserve if your budget allows, because one broken bay on a busy night costs real revenue.

Estimated time: 14 days

7

Set Up the Bar, Food, and Licenses

Food and drink sales are what make many golf lounges profitable, so treat the bar as part of the core business, not an extra. Apply for the liquor license as early as possible, because it can take months. Rules vary a lot by state: some states issue licenses for a modest fee, while quota states can require buying an existing license on the open market for tens or hundreds of thousands of dollars. A beer and wine license is often easier and cheaper than a full liquor license. If you serve food, you will need a health department plan review and permit. Many lounges keep the menu simple, with flatbreads, sandwiches, and snacks that can be made with ovens and limited equipment, which keeps kitchen costs down and may avoid a full commercial hood. Ask your health department and fire marshal early what your menu requires. Buy general liability and liquor liability insurance before opening, and train staff on responsible service, since guests swinging clubs after a few drinks is a real safety concern. Some venues set a rule that guests cannot swing after a certain number of drinks or require closed-toe shoes in the bays.

Estimated time: 30 days

8

Set Up Booking, Memberships, and Opening Programs

Choose booking software that lets guests reserve bays online, pay in advance, and buy memberships or packages. Members are the most stable revenue: offer monthly plans with included hours, priority booking, and member pricing, and consider keyless access for after-hours member play if your insurance and lease allow it. Add security cameras, a door access system that logs entries, and clear posted rules for unstaffed hours. Plan your programs before opening: winter leagues, lessons with a local PGA professional, club fitting, kids' clinics, and corporate events can fill weekday hours that walk-in groups do not. Hold a soft opening for neighbors, local golf clubs, and businesses in the area, and use the first weeks to fix problems with bay calibration, lighting, and noise. Track bay utilization by hour and day, and adjust prices for peak and off-peak times. Once the venue is running, set a schedule for screen, mat, and equipment maintenance, and recalibrate launch monitors regularly so your simulator numbers stay accurate.

Estimated time: 21 days

Materials

MaterialEst. CostRequired
Commercial overhead launch monitor (per bay)$15,000Required
Simulation software commercial license (per bay, annual)$1,500Required
Commercial impact screen and enclosure frame (per bay)$3,500Required
Short-throw projector and ceiling mount (per bay)$2,500Required
Gaming computer and display for scorecard (per bay)$2,500Required
Commercial hitting mat, turf, and stance mat (per bay)$1,800Required
Padded bay divider walls and side netting (per bay)$3,000Required
Ceiling demolition, padding, and dark paint$15,000Required
Sprinkler modifications or new sprinkler system$60,000Optional
New restrooms with slab cutting and plumbing$70,000Required
HVAC upgrades for added people and equipment heat$40,000Required
Electrical, data cabling, and dimmable lighting$45,000Required
Acoustic panels and demising-wall sound insulation$15,000Required
Bar build-out, coolers, and bar equipment$60,000Optional
Limited-menu kitchen equipment (ovens, prep, sinks)$30,000Optional
Lounge furniture, high-tops, and bay seating$25,000Required
Booking software, POS, and door access system$8,000Required
Security cameras for staffed and after-hours use$5,000Required

Permits

Building Permit for Tenant Improvement and Change of Occupancy

Required for the build-out. Converting retail (Group M) space to a lounge where people eat and drink usually makes it an assembly (Group A-2) occupancy, which can trigger sprinklers, more exits, accessibility upgrades, and added restrooms. A studio with fewer than 50 occupants may be classified as Group B instead. You will need architect-stamped plans, inspections during construction, and a new certificate of occupancy before opening.

$8,000

Liquor License

Required to serve alcohol. Costs and wait times vary widely by state and city: some places issue beer and wine or full liquor licenses for a modest fee, while quota states may require buying an existing license on the open market. Apply early, because approval can take several months and may involve public notice or a hearing.

$5,000

Health Department Food Service Permit

Required if you prepare or serve food. Most health departments require a plan review of the bar and kitchen layout before construction, then an inspection before opening. A limited menu may reduce equipment and ventilation requirements, so ask early what your planned menu needs.

$1,000

Frequently Asked Questions

How much does it cost to convert a vacant retail storefront into an indoor golf simulator lounge?

The estimated cost ranges from $200,000 to $900,000, depending on your location, project scale, finish quality, and whether you hire professionals or do it yourself.

How long does it take to convert a vacant retail storefront into an indoor golf simulator lounge?

A typical conversion takes 16 to 40 weeks, covering 8 major steps including choose a business model before you choose a space, vet the storefront: height, columns, and neighbors, settle the code path: occupancy, sprinklers, and restrooms, and more.

What permits do I need to convert a vacant retail storefront into an indoor golf simulator lounge?

You may need: Building Permit for Tenant Improvement and Change of Occupancy (approximately $8,000); Liquor License (approximately $5,000); Health Department Food Service Permit (approximately $1,000). Requirements vary by jurisdiction.

What materials do I need to convert a vacant retail storefront into an indoor golf simulator lounge?

Key materials include: Commercial overhead launch monitor (per bay) (~$15,000), Simulation software commercial license (per bay, annual) (~$1,500), Commercial impact screen and enclosure frame (per bay) (~$3,500), Short-throw projector and ceiling mount (per bay) (~$2,500), Gaming computer and display for scorecard (per bay) (~$2,500), Commercial hitting mat, turf, and stance mat (per bay) (~$1,800).

What is the difficulty level of this project?

This project is rated as advanced. This is a complex project requiring significant construction experience.

Related Guides

Convert a Vacant Retail Storefront into a Reformer Pilates Studio

Pilates was the most-booked workout on ClassPass for the third straight year in 2025, with overall Pilates reservations up 66 percent and Reformer bookings up 71 percent, and the operators have noticed. In 2026, Club Pilates franchisee Riser Fitness signed a 127-studio development agreement, Crunch launched Crunch Reform Pilates across 20 locations, and Life Time is building Pilates studios into each of its new clubs. One industry forecast puts the number of US reformer studios at about 1,800 at the end of 2025 and roughly 2,600 by 2030. Many of those studios are going into the same kind of space: a 2,000-square-foot storefront in a strip center or on a main street, left behind by a mattress store, a phone shop, or a bank-adjacent retailer. That is a good match. A reformer studio needs a clear rectangular floor, decent ceiling height, good HVAC, and a couple of restrooms, and it does not need a kitchen, grease trap, or drive-thru. It is also one of the few commercial conversions on this site that can stay an intermediate project, because of a specific code rule: under IBC Section 303.1.1, an assembly-type space with fewer than 50 occupants is classified as Business (Group B), the same as the retail or office use it often replaces. A 12-reformer studio usually comes in under 50, which can avoid a change of occupancy and the sprinkler, exit, and restroom upgrades that come with Assembly. This guide covers how to check that before you lease, how to size the room around the reformers, why flooring and sound control matter more than finishes, how to plan showers and changing rooms, and how to budget for equipment that commonly runs $3,000 to $6,000 per machine.

$140,000 – $380,000

Convert a Closed Drugstore into an Express Tunnel Car Wash

America is working through the largest wave of drugstore closures in its retail history. Rite Aid shut its remaining roughly 1,300 stores and ceased operations in 2025, and Walgreens is in the middle of a plan to close about 1,200 locations over three years, with CVS trimming its fleet as well. That has dumped hundreds of nearly identical buildings onto the market at once: single-story boxes of roughly 11,000 to 15,000 square feet, sitting on one-to-two-acre "hard corner" parcels at signalized intersections with excellent visibility, curb cuts on two streets, and a drive-thru lane already wrapped around the building. Dollar stores, clinics, gyms, and thrift stores are backfilling many of them, usually at rents 20 to 40 percent below the old pharmacy leases, but one of the most distinctive second lives is the express tunnel car wash. Operators like Express Wash Concepts have converted several former Rite Aids and Walgreens in Pennsylvania and Michigan, reporting roughly $3 million to renovate, redevelop, and equip one, and in August 2026 Falls Township, Pennsylvania, recommended conditional use approval for another Rite Aid-to-tunnel conversion. The logic is simple: a drugstore's long rectangular footprint can swallow a 100-to-150-foot conveyor tunnel with the loud equipment indoors, which neighbors and planning boards like far better than an open-ended new build, and the corner parcel offers the traffic counts that a membership wash model lives on. The catches are real, though. Zoning boards will scrutinize stacking (queue) length, wash water must be kept out of storm drains, the slab has to be cut for trench drains and reclaim pits, dryer and vacuum noise must be controlled at the property line, and the existing building's column grid and roof height do not always cooperate. This guide walks through underwriting the site, testing the tunnel fit, winning zoning, engineering water and sewer, gutting and rebuilding the box, installing equipment, and opening with a membership base already signed up.

$1,800,000 – $4,500,000

Convert an Aging Roadside Motel into Studio Apartments

Hotels and motels are the quiet workhorse of the adaptive reuse boom. In RentCafe's data, office buildings take the headlines at about 47 percent of the units in the national conversion pipeline heading into 2026, but hotels are the second-largest source at about 18 percent - and in 2024, the strongest year on record for adaptive reuse, hotels actually led completions, delivering more than 9,100 apartments against roughly 5,900 from offices. The reason is simple: a motel is already most of the way to being housing. Every room has its own bathroom, its own exterior door or corridor entry, its own window, a dedicated plumbing stack, and usually its own through-wall heating and cooling unit, so the expensive problems that sink office conversions - deep floor plates with no daylight, no plumbing risers, no operable windows - simply do not exist. That is why the numbers work. California hotel-to-housing conversions have averaged about $130,000 per unit against $380,000 to $570,000 per unit for new construction, and projects such as the 107-unit Elevate at Baymeadows in Jacksonville, a former Days Inn, and more than 500 converted units in Kissimmee show the model working at the economy end of the market, where older Class B properties are the usual raw material. But a motel is not an apartment building in the eyes of the code, and the gap between the two is where budgets are made or broken. A guest room is a transient occupancy; an apartment is a permanent dwelling, and the change triggers fire sprinklers, real kitchens with the electrical service to run them, accessibility upgrades, sound and fire separation between units, and parking and zoning review in a district that may never have allowed residential use. This guide walks through picking a motel worth converting, clearing zoning and the change of occupancy, designing a unit mix that rents, and sequencing the fire, electrical, and plumbing work - and it is direct about the things that kill these deals: a 300-square-foot room that cannot legally hold a kitchen, an electrical service sized for lamps and a television, and a sprinkler retrofit nobody priced.

$900,000 – $7,000,000

Convert a Shuttered Bank Branch into a Modern Dental Practice

Retail banking is emptying out its real estate, and healthcare is quietly absorbing it. At least 170 U.S. bank branches closed in the first quarter of 2026 alone, with another wave following the Fifth Third acquisition of Comerica, and the closures cluster in exactly the metros where dentists want to be - Phoenix, Dallas-Fort Worth, Atlanta, Charlotte. What comes onto the market is unusually good: a freestanding pad site on a high-traffic corridor, ample dedicated parking, strong street visibility, a hardened envelope, and frequently a drive-thru canopy. Quick-service restaurants take some of these buildings, but medical and dental office users are taking a growing share, and there is a structural reason why. A dental practice needs 2,500 to 4,500 square feet, forty to sixty parking spaces worth of comfort, a visible corner, and a building it can hold for fifteen years - which is the exact profile of a branch. The catch is that a bank is not a generic retail shell. The original program is hard-baked into the structure: a poured-in-place vault with rebar-laced walls, a teller line with under-counter conduit and alarm infrastructure, security glazing, a controlled entry sequence, a night-depository penetration, and drive-thru circulation that dictates the site plan. Vault removal alone commonly runs $20,000 to $50,000 and can exceed $75,000 on a poured-in-place unit, and it is not optional if the vault sits where your operatory row has to go. Layer on dental construction economics - roughly $250 to $400 per square foot in 2026, or $300 to $500 once equipment and the specialized plumbing, vacuum, compressed air, and imaging systems are counted, with a single operatory costing $35,000 to $55,000 before the chair - and this becomes a project you underwrite building by building, not category by category. Done well, a dentist gets a landmark corner for less than ground-up cost. Done badly, the vault eats the operatory row and the budget with it.

$400,000 – $2,200,000

Tags

indoor golfgolf simulatorgolf loungeretail conversionvacant storefrontsmall businessentertainment venuecommercial real estate2026 trends